Ladder cable trays LNK
Extremely heavy loads are used. It is mounted on the wall with anchor bolts type FBN II. 2 PEKOM M8 x 16 screws are used for mounting the console on the U-post.
The thickness of the sheet from which it is made is 2 mm, the thickness of the plate is 4 mm.
It can be made in the following surface protection variants:
The thickness of the sheet from which it is made is 2 mm, the thickness of the plate is 4 mm.
It can be made in the following surface protection variants:
- GL- Cold galvanizing
- TC- Hot galvanizing
- UP1000- Ultra protector 1000
Typ | Width | Height | Thickness | Length | Allowed load (kg/m) | Article | ||
---|---|---|---|---|---|---|---|---|
mm | mm | mm | mm | 1.5m | 2.0m | 2.5m | PL | |
LNK 6 10 300 PL | 100 | 60 | 1.5 | 3000 | 250 | 200 | 125 | 20010002 |
LNK 6 20 300 PL | 200 | 60 | 1.5 | 3000 | 247 | 197 | 120 | 20010004 |
LNK 6 30 300 PL | 300 | 60 | 1.5 | 3000 | 245 | 195 | 120 | 20010007 |
LNK 6 40 300 PL | 400 | 60 | 1.5 | 3000 | 235 | 190 | 115 | 20010010 |
LNK 6 50 300 PL | 500 | 60 | 1.5 | 3000 | 230 | 185 | 112 | 20010013 |
LNK 6 60 300 PL | 600 | 60 | 1.5 | 3000 | 232 | 190 | 115 | 20010016 |
TC- Hot Deep Galvanized | ||||||||
LNK 6 10 300 TC | 100 | 60 | 1.5 | 3000 | 250 | 200 | 125 | 20020075 |
LNK 6 20 300 TC | 200 | 60 | 1.5 | 3000 | 247 | 197 | 120 | 20020076 |
LNK 6 30 300 TC | 300 | 60 | 1.5 | 3000 | 245 | 195 | 120 | 20020077 |
LNK 6 40 300 TC | 400 | 60 | 1.5 | 3000 | 235 | 190 | 115 | 20020078 |
LNK 6 50 300 TC | 500 | 60 | 1.5 | 3000 | 230 | 185 | 112 | 20020079 |
LNK 6 60 300 TC | 600 | 60 | 1.5 | 3000 | 232 | 190 | 115 | 20020080 |